All rights reserved
20
© FTEmaximal
Buttons on the front
Multivision
First you have to select wich output is going to be programmed with key F9
(AV/RF):
LED lights in red if output is selected by SCART, if it is pressed color will change
into green and output will be programmed by modulator, selection is sequential
RED = SCART output
GREEN = Modulator output
Once output to be programmed is selected, press desired input between F4 and
F8.
Video Recording (VCR)
The scart marked as VCR is configurated in bidirectional mode, it means that has
input signals (generated by the video when is turned ON) and also output
connections to record in the video selected source to TV out. For example, if you
wish to record a program from satellite receiver you must select SAT input to
main TV and use right input channel in the video (LINE IN/AV etc.).
Attention:
Used scart-scart must have 21 pins connected and must not modify input source
selection meanwhile it is recording (in this case it would record another signal).