PAG. 14
rev 1.2
PANEL & REMOTE CONTROL DESCRIPTION
1. PANEL & REMOTE CONTROL DESCRIPTION
1.1. FRONT PANEL DESCRIPTION
1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver,
you have to use the switch on the back of the receiver.
2. STAND-BY-LED: Shows if the receiver is in Standby mode (when LPC mode is ON).
3. LOCK LED: Indicates a suffi cient signal level at the IF IN input.
4. DISPLAY: 4 Digits to display the program numbers.
5. IR-SENSOR: Reception sensor for the IR remote control signals.
6. CH+/-: These buttons allow changing the current channel.
7. Conditional Access: Opining front door, you can access to conditional access system.
1. IF IN: Satellite input.
2. RS-232: Serial Port allowing software upgrades.
3. RCA A/V
4. S/PDIF: Coaxial output for digital audio (AC3).
5. S/PDIF: Optical output for digital audio (AC3).
6. ANT IN: Antenna input for the terrestrial antenna.
7. AC IN: Mains input cable.
8. POWER ON/OFF: Allows to completely switching off the receiver.
9. IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited channel
selection.
10. TV SCART: Output SCART for the connection to a TV set.
11. VCR SCART: Output SCART for the connection to a VCR set.
12. TO TV: Modulator output for the connection to a TV set.
1.2. REAR PANEL DESCRIPTION
1
2
7
8
9
11
4
5
6
3
12
10
1
4
3
2
5
6
7
ENGLISH
Summary of Contents for MAX S402PVR
Page 1: ...MAX S402PVR...
