FSR Magellan MDC-MK1 Installation & Operation Manual Download Page 4 | Manualshive

Page: 4 / 28

background image

FSR

MDC – MK1 Operations Manual [

Page 4 of 28

]

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Magellan MDC – MK1

Computer To Video Down Converter

1. INTRODUCTION

The Magellan MDC-MK1 is a PC and Macintosh compatible computer to video down converter. The
MDC-MK1 automatically scales the incoming computer image to fit the screen and outputs it as a
Composite Video and S-Video signal that is NTSC/PAL switchable. With superior digital processing and
filtering, the MDC-MK1 accepts any computer signal from 640 x 480 (VGA) up to 1024 x 765 (VGA).

Designed for ease of operation the MDC-MK1 provides front panel controls for the Overscan/Underscan,
Freeze, and Menu selections. The menu selection controls work with the on-screen display to provide
complete control of the set-up and operation of the down converter. It can also be controlled by the
included handheld IR Remote or via RS-232 control. The IR Remote also emulates mouse control for the
PCs. The non-volatile memory retains all of the settings for each of the computer resolutions input into
the MDC-MK1.

The MDC-MK1 provides a computer monitor loop-thru to allow the use of a local monitor and the
composite and S-Video outputs are active at the same time. The outputs of the Magellan MDC-MK1 can
also be fed to one of FSR’s Distribution Amplifiers, Navigator Series of Video Switchers or Pocket
Navigators to distribute and control the converted signal. The convenient 1/2 rack, 1 rack unit high, down
converter comes complete with IR Remote, Rack Mount, and AC Adapter.

Applications:

Boardrooms, Education, Training Rooms, Rentals, Staging Events, Conferences

Centers, Videoconferencing, Video Recording.

Functions:

Computer Image Freeze, NTSC / PAL Output Selection, Brightness Control, Horizontal

& Vertical Size, Position Controls, Underscan / Overscan Presets, 2X Image Zoom and Pan.

2. HARDWARE CHECKLISTS

The Magellan MDC - MK1 desktop is supplied with the following items:

§

Magellan MDC - MK1 unit.

§

Power Supply

§

IR Remote Control (MDC – RC )

§

Rack Mount

§

Magellan MDC - MK1 Instruction Manual.

«
...
2
3
4
5
6
...
»

Summary of Contents for Magellan MDC-MK1





























Reviews:

No comments

Related manuals for Magellan MDC-MK1

Dial-to-IP 5301-DC

Brand: Accelerated Pages: 26

Brand: HANYOUNG NUX Pages: 2

Brand: Planet Pages: 7

Brand: Promax Pages: 14

Brand: Orban Pages: 90

Brand: BK Precision Pages: 23

Sync Converter/Stabilizer SCS 300

Brand: Extron electronics Pages: 1

Brand: Alcor Pages: 22

Brand: SIIG Pages: 34

Brand: MPP Solar Pages: 59

Brand: Extron electronics Pages: 54

Brand: Samlexpower Pages: 48

Brand: AEG ID Pages: 20

Brand: Wellav Pages: 24

Brand: Zling Pages: 12

Brand: Lindy Pages: 12

Brand: Omron Pages: 400

Brand: Camos Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands