FSR
MDC – MK1 Operations Manual [
Page 19 of 28
]
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
8.3 Magellan MDC - MK1 setup
Make sure that RS – 232 mode is set to Mouse (and not 'Control') within the Advanced menu of the
On-screen Display. (This is the default.)
8.4 Using the mouse emulator
The MDC – MK1 uses the computer's standard mouse driver, saving the need to load additional
software, just turn your computer on with Magellan MDC - MK1 attached as described above.
If you are using an RS – 232 “Y Adapter” cable, both the existing mouse and the Magellan MDC -
MK1 will share the same COM port and software driver.
If you are using a separate COM port for the Magellan MDC - MK1, your PC may recognize that a
Mouse is attached when booting up. If it does not, run "Add New Hardware" from the Control Panel to
automatically install the "Standard Serial Mouse" driver. You can now use the four arrow buttons to
move your mouse pointer around the screen.
§
L.CLICK (left click) has the same function as a single left click of a standard mouse button.
§
D.CLICK (double click) has the same function as a double left click of a standard mouse button.
§
R. CLICK (right click) has the same function as a single right click of a standard mouse button.
