FSR CN-2002, Operator'S Manual

Page: 24 / 69

A/V Follow Mode
This mode provides simple audio/video switching from either the audio source select keys or the video source select
keys. If a key from either bus is selected, the corresponding key on the other bus will “follow” and light green. Any
transition effected in this mode will be performed on both buses identically, with both audio and video transitioning in
the same manner for the same amount of time.
A/V Breakaway Mode
Audio “breakway” mode separates audio and video selections and transitions. A selection from one of the video
source select keys will not affect the audio source select bus in any way. Only a selection from the audio source
select keys will effect a change of the audio preview output. In this mode, audio can be switched and transitioned
without video selection or transition. Also in this mode, video can be switched and transitioned without audio selection
or transition. Thus this mode separates the two selection buses and sources so they can be controlled independently.
EFFECTS Keys
The currently selected Preview source can be transitioned seamlessly to the Main output using one of the EFFECTS
keys. After selecting a Preview source, simply press either CUT or DSLV. The Preview source will automatically and
seamlessly switch to the Main output. Dissolve duration in audio/video “Follow” mode is programmed via the EFFECT
menu between 0.0 and 5.0 seconds.
MIXER Keys
Two non-switched audio inputs, MIC and LINE, can be mixed with audio from the selected input channel. When a
MIXER indicator is green, the mixer source is active on both Main and Preview. A mixer source is disabled when it’s
indicator is yellow.
Menu Operation
The Menu Select keys are used to activate menus used to configure the unit for operation. Pressing one of the six
Menu Select keys will call up the corresponding menu on the display. The operation of each menu is described in
detail in the following sections of this document.
Once a menu is selected with the Menu Select keys, the Adjust control is used to scroll through the menus items. As
the user scrolls through the menu items, a pointer at the left of the menu indicates the current position of the scroll
bar. When the user reaches the menu item that needs to be changed, the Select key is used to select the menu item.
The pointer at the left hand side of the display changes to a # symbol to indicate when a menu item is selected. The
Adjust control can then be used to change the parameters associated with the menu item. When the desired
parameter has been selected, the operator presses the Select key to enter the new values. The menu parameters are
changed and the menu returns to scrolling mode.
The ESC key is used to return to scrolling mode without entering any changes made to a menu item. When this key is
used, changes made to the selected menu item are discarded rather than entered as described for the Select key
above.
16 Compass
S
2