Frye FONIX 7000 Operator'S Manual Download Page 184

Page: 184 / 216

176

FONIX 7000 Hearing Aid Analyzer

Ear Level Adapter:

(044-1007-00) Per requirements of ANSI S3.22-1996 for adapting
ear level aids to the HA-2 coupler.

Sound Chamber Cable: (119-0204-07)
Battery Pills

#13: (059-2005-02)

#675/76: (059-2004-02)

#312: (059-2006-02) #10A/230: (059-2010-01).
All with 12" cables—24" cables available on request.

Roll of Printer Paper

(026-0006-00)

Operator’s Manual:

(010-0019-00)

OPTIONAL ACCESSORIES

Video Display Monitor: (058-0077-00) VGA, flat panel, 15", color.

Shipping weight: 21 lbs (10 kg).

6 cc Coupler:

(044-1004-03) NBS 9A, for checking audiometer headphones.

Test Chamber Stand:

(030-1002-04) Tubular steel stand which brings the testing area
or the test chamber to convenient table height. Blue color.

Quest QC-10 Sound

(030-0004-00) For calibration of microphone.

Level Calibrator:

amplifier. 1 kHz, 114 dB SPL.

Telewand:

(043-1053-00) For checking response of aids in “telephone”
mode. ANSI S3.22-1996.

Telecoil Induction Loop: (120-1002-00) For checking hearing aid response to a magnetic

loop field.

Battery Pills:

#AA: (059-1011-00); #41: (059-2009-02); #5: (059-2008-01).
All with 12” cables—24” cables available on request.

Maintenance Manual:

(010-0020-00) On request at time of purchase.

SAFETY

Electronics module conforms to IEC 60601-1

GUARANTEE

The FONIX 7000 and its accessories are guaranteed to be free from manufacturing defects
which would prevent the products from meeting these specifications for a period of one
year from date of purchase.

Summary of Contents for FONIX 7000
























































































































































































































Search results

Summary of Contents for FONIX 7000

Reviews:

Related manuals for FONIX 7000

Brands by name

Popular brands

Frye FONIX 7000, Operator'S Manual

Search results

Summary of Contents for FONIX 7000

Reviews:

Related manuals for FONIX 7000

Brands by name

Popular brands