2 Residual Danger
15
Read the Assembly Instructions!
Refer to the Assembly Instructions and any the accompanying documentation for information
on maintaining the robot system.
Maintenance and inspection intervals stipulated in the Assembly Instructions, including the
replacement of wear and spare parts, must be observed.
Spare parts must correspond to the technical requirements specified by fruitcore robotics
GmbH. This is always guaranteed with original spare parts.
2.11
Residual Danger
The robot system is built according to the current state of the art and in line with the recognized safety
rules. Nevertheless, danger to the user or third parties or impairments of the system and other material
assets may arise in the course of use.
DANGER!
Danger resulting from human error or malfunctions
When integrated in a complete system, the robot system must be integrated in the emer-
gency stop circuit of the higher-level system.
WARNING!
Operation without protection devices presents a risk of injury
The robot must be used only within suitable protection devices (e.g. separating protection
device, light curtain, or safety laser scanner).
All protection devices must always be completely assembled and functional. The protection
devices must be removed only while maintenance work is being performed by the mainte-
nance personnel.
Improper use of the robot system may result in the following dangers:
RISK OF BURNS!
The robot generates heat during operation.
The robot must not be touched during or immediately after operation.
After switching off the robot, wait until it has cooled down or wear heat protection gloves.
Summary of Contents for HORST900
Page 3: ...III ...
