5. WARNING
6. INSTALATION
INSPECT THE MACHINE FOR POSSIBLE DAMAGES DURING THE TRANPORT OR A BAD HANDLING.
If it was necessary present a reclamation before 24 hours to the transport company.
Read the instructions carefully before using the machine and keep them for future references.
The manufacturer declines all responsibilitiy if the standards of the manual are not respected.
The present machine is a dryer and polisher for glasses and cups.
This machine should be only used for the purpose for which it has been designed. Any other use is
inappropriate and therefore dangerous. The manufacturer will not be responsible for any damage caused
by inappropriate use.
Before installing and using the machine read carefully this instruction manual.
The manufacturer will be able to introduce technical or aesthetic changes without previous notice.
Improper installation may damage the dryer machine. Please note the following during initial installation
and whenever the dryer machine is moved. The machine should be placed on a dry surface. Please be
sure that no liquid at all gets in contact with the air tube ( above all residual waters,...), because the heating
element ( or resistance ) could be damaged. The machine can be placed on many places within the
establishment: the working area, racks, etc ...
1.Insert the rollers; these have to be fixed turning it clockwise to the end. Take into account the
dimensions of the rollers: use the shorter and narrower for the internal side of the cups ( put it
in the centre ). The bigger rollers can be placed indistinctly on the rest of the 4 external supports.
2. Plug the machine in. Once you have done it, the machine is ready to be used.
3. When the machine is working, press the on/off switch to stop it.
EN
20
