frozy FR25 SI, User Manual

Page: 15 / 20

Chapter 06. Actions to be Taken Before Calling Authorized
Service
Malfunction Probable
Reason Solution
Ice Maker does not
work Power button is
Off. Set the power button to the “On” position.
The power
connection is
faulty. Get the power connection checked by a
qualified electrician.
The Ice Maker is
in protection
mode. Check the place selection instructions of the
ice maker. Ice Maker does not receive
adequate amount of air.
No power in the
outlet. Check the fuse connected to the outlet.
The compressor
stops shortly after it
starts working Ambient
temperature is
very high Check the place selection instructions of the
ice maker. Ice Maker does not receive
adequate amount of air. Clean the
ventilation filter.
Grid voltage is
low Get the power connection checked by a
qualified electrician.
Ice Set is cooled but
the water inside the
water pool is
insufficient Water valve is
faulty Contact the nearest Authorized Service.
Main water
pressure is low Make sure that the main water pressure is
greater than 1 Bar.
Pool’s discharge
plastic seeps Place the pool’s discharge plastic to its slot
tightly.
Ices are not
transparent Water nozzle is
blocked Water nozzle sprayer should be checked.
The blocked nozzles should be cleaned.
Water pool is
dirty Clean the Ice Maker by following the
cleaning instructions.
Pressure of the
water pump is
low Contact the nearest Authorized Service.
The water is
blurry / dirty /
chlorinated Use a water filter.