frozy FR25 SI, User Manual

Page: 14 / 20

Do not turn off the product while cleaning is in progress.
After the cleaning process, discharge the water inside the water pool.
(See figure 3)
R ight after this cleaning, the Ice Set must be cleaned.
Cleaning of the Ice Set
To remove the top cover, remove the screws in “Figure-6”. Remove the plastic cover
on the cooling pipes. Clean the cooling pipes and visible surfaces in the tank with
cleaning solution / soapy cloth. Then rinse and then dry. Close the plastic cover that
protects the cooling system pipes and then close the top cover of the product. Then
replace the screws.
Cleaning of the Ice Storage Bin
1.
To clean the ice tank, first turn the power switch to the “Off” position. Then
disconnect the product from the main power supply.
2. Drain the ice completely from the ice tray.
3. Wipe the inside of the container with cleaning solution / soapy cloth and then
rinse / dry.
4. Take care not to allow any lime and/or cleaning solution residue to remain.
Cleaning of the Water Inlet Filter
1.
Disconnect the Ice Maker from main power supply.
2. Disconnect the water connection of your ice maker.
3. Remove the water inlet filter. (The frequency of cartridge replacement varies
depending on the usage period, but it is recommended to change every 6
months.)
4. Follow the filter manufacturer's maintenance and cleaning instructions /
recommendations to perform cleaning and maintenance of the water inlet filter.
Then return the Ice Maker to operation by following the installation instructions.
The applications specified in the product cleaning instructions should be performed
at least 4-5 times a year.