FrontPath ProGear, User Manual

Page: 38 / 59

Using the Settings-Toolbox
Confidential and Proprietary
32
S
ETTING THE
S
LEEP
T
IME
You can set a timer in ProGear to automatically put the system
into Sleep mode after a defined period of inactivity (1,2, 5, or 10
minutes). The Sleep feature turns off power to the display, thereby
conserving system resources.
To set the Sleep time:
1. Open the Taskbar, and tap the Settings-Toolbox button .
The Settings-Toolbox window appears.
2. Tap the Sleep Timing box, and select the inactivity time that
should elapse before the system goes into Sleep.
3. Tap the X button to close the Settings-Toolbox window.
Note

For more information on Sleep, see Chapter 2, Power
Management .
S
ETTING THE
O
FF
T
IME
You can set a timer in ProGear that automatically turns the system
off, suspending power to the LCD panel, the backlight, the hard
disk, and the network connection. This feature provides advanced
power management.
To set the Off time:
1.
Open the Taskbar, and tap the Settings-Toolbox button. The
Settings-Toolbox window appears.
2. Tap the Off Timing box, and select the inactivity time that
should elapse while the system is sleep and before it turns off.
3. Tap the X button to close the Settings-Toolbox window.
Note  For more information on Off, see
Chapter 2, Power
Management.