FrontPath ProGear, User Manual

Page: 14 / 59

Getting Started
Confidential and Proprietary
8
S
TARTING
P
RO
G
EAR FOR THE
F
IRST
T
IME
To power on ProGear for the first time:
1.
Insert the electrical plug
of the AC/DC power
adapter into a properly
grounded electrical
outlet.
2. Plug the round end of
the AC/DC power
adapter into the DC
power-in jack of
ProGear.
3. Let the battery charge for three hours before using ProGear in
a mobile environment. You can use ProGear while the battery
is charging, as long as the unit remains connected via the
AC/DC power adapter.
4. Align the touch screen. For instructions, see Chapter 5.
T
URNING
P
RO
G
EAR
O
N
To power on ProGear, press the power button located on the
bottom left corner of the unit (when viewed in landscape mode).
The system displays the Netscape browser window in full screen.
Note

The first time that ProGear is turned on you will see a boot
sequence. This boot sequence will also occur every time all the
batteries are removed from the unit.
If you have any problems turning ProGear on, see
Appendix A,
Troubleshooting .
Figure - Connecting Power