Frontier SB1388, Operator'S Manual

Page: 25 / 60

ASSEMBLY
OM 0437SB1388-A
23
Installation of the Snowblower with the Three Point Hitch
(Figure 17)
1.
Attach the tractor lower hitch arms (item 1) to
the snowblower lower hitches (item 7) with the
hitch pins and linchpins (items 6-2).
2.
Install the tractor adjustable arm (item 3) in the
upper hole of the snowblower attaching plates
(item 5) with the hitch pin (item 4).
3.
To level snowblower front to back, adjust using
the tractor adjustable arm (item 3).
4.
To level side to side, use leveling crank on right
lower lift arm.
5.
Set the tractor anti-sway turnbuckles so the
snowblower does not sway. Be sure the
turnbuckles clear the tractor tires.
CAUTION:
Before connecting
snowblower driveline to tra ctor drive shaft,
make sure driveline is not too long in raised,
lowered and middle position. If the driveline is
too long it must be shortened, to avoid
damaged to trac tor. See pages 25 to 27 for
instructions.
Figure 17