Frontier SB1388, Operator'S Manual

Page: 26 / 60

ASSEMBLY
OM 0437SB1388-A
24
Installation of the Snowblower with a Quick Hitch
(Figure 18)
Note:
Installation of the Snowblower with a
Quick Hitch requires the
5RDF0077 kit
of
Lower Hitches for Quick Hitch.
1.
Install the 1 1/8" x 6 1/4" lg
Cat. 2
(item 2) in
the upper holes by first inserting the
bushings 1 1/2" ext. x 2 7/8" lg (item 3)
between each lower hitch plates and secure
with the linchpins (item 4) as illustrated .
2.
Install the 1" x 6 1/16" lg Cat. 2 hitch pin
(item 5) in the lower holes of the upper hitch
by first inserting a bushing 1 1/4" ext. x 2 3/8"
lg (item 6) between the plates and secure
with the linchpin (item 4).
CAUTION:
Before connecting
snowblower driveline to tractor drive shaft,
make sure driveline is not too long in raised,
lowered and middle position. If the driveline
is too long it must be shortened, to avoid
damaged to tractor. See pages 25 to 27 for
instructions.
Figure 18