6
Connection
points on front of
machine
Connections, switches and system add-ons
Fig. 3
Design with central welding torch connec-
tion GWZ
Fig. 4
Design with central welding torch connec-
tion F
[A]
TIG TORCH CONNECTION
-
for connecting the GAS + CURRENT supply for the welding torch
[B]
(+) SOCKET with bayonet coupling
-
as the earth cable connection point with TIG welding;
-
as the connection either for the manual electrode cable or the earth cable
with manual electrode welding, depending on the type of electrode used.
[C]
TORCH CONTROL SOCKET
-
Steuerstecker des Schweißbrenners einstecken und verriegeln
[D]
(-) SOCKET with bayonet coupling
-
only for welding torch central connection GWZ
-
as the connection either for the manual electrode cable or the earth cable with
manual electrode welding, depending on the type of electrode used.
[E]
GAS CONNECTION
-
Screw the terminal nut of the gas hose onto the connection-fitting and tighten
it
[F]
MAINS CABLE WITH STRAIN-RELIEF GRIP
[G]
CONNECTING SOCKET for remote control unit
-
Plug the remote control cable plug into the socket, the right way round, and
tighten the swivel nut
-
The desired welding current is set on the remote control unit.
-
The machine automatically recognizes the fact that the remote control unit
has been plugged in
-
The short-circuit-proof supply voltage to the remote control units protects the
electronics in the event of any damage to the remote control cable.
Fig. 5
Rear side of the machine
Connections and
switches on the
rear of the machi-
ne
Summary of Contents for TransTig 1600
