Fronius TPS/i Robotics Pull, Operating Instructions Manual

Page: 39 / 148

39
EN
Robot welding torch
Safety
General The following torch bodies are recommended for the CMT process:
-
MTB 250i / 320i / 400i / 500i / 700i: 22 - 36°
- MTB 330i: 22°
The following maximum angles are permitted during the CMT process:
-
MTB 250i / 320i / 400i / 500i / 700i: 45°
- MTB 330i: 36°
The robot welding torch transmits the arc power to the workpiece. The gas or water-cooled
TPS/i welding torch is designed for use with the CrashBox /i.
The torch body has an integrated lead for gas nozzle touch sensing.
CAUTION! Risk of burns from hot torch neck, hot torch neck coupling and other
hot welding torch components. Before starting work on the torch neck, the torch
neck coupling and all other welding torch components:
-
allow the torch neck, torch neck coupling and all other welding torch compo-
nents to cool down to room temperature (+25 °C, +77 °F)
- wear electrically insulated and heat protective gloves
- use a suitable tool
Standard: with wearing parts, without contact tip
OVT/WWP: without wearing parts
TXi: automatic torch body changeover
TXM: manual torch body changeover