7
EN
(5)
(-) current socket with bayonet latch
For connecting the:
-
Rod electrode or grounding cable for manual metal arc (MMA) welding, depend-
ing on the type of electrode being used
-
Welding torch in TIG welding (current connection)
(6)
Remote control connection socket
For connecting a remote control
Operating ele-
ments
Controls and indicators on the control panel
(1)
"Process" button
For selecting the welding process
-
Manual metal arc welding with HotStart function (recommended for rutile elec-
trode)
-
Manual metal arc welding with SoftStart function (recommended for basic elec-
trode)
-
MMA welding with Cel electrode
-
TIG welding
-
TIG pulsed arc welding (TP 2500/3500 TIG only)
(2)
Remote control indicator
Lights up when a remote control is connected
(3)
Error indicator
Lights up if the device is too hot
(4)
Welding current adjuster
For continuously adjusting the welding current
(5)
VRD indicator
-
Lights up green when the Voltage Reduction Device (VRD) is active and the open
circuit voltage is less than 35 V
-
Lights up red when the Voltage Reduction Device (VRD) is active and the open
circuit voltage is greater than 35 V
-
Does not light up if an open circuit voltage outside the VRD range is set
(3)
(4)
(5)
(1)
(2)
IMPORTANT!
The selected welding process remains in memory even after the mains
plug is disconnected.
