16
The downslope depends on the welding current selected and cannot be adjusted. The du-
ration of the downslope between the following values must be extrapolated.
-
Downslope with low welding current (10 A):0.4 seconds
-
Downslope with maximum welding current (250 A):10 seconds
Gas post-flow time:
The gas post-flow time depends on the welding current selected and cannot be adjusted.
-
Gas post-flow time with minimum welding current (10 A):3 seconds
-
Gas post-flow time with maximum welding current (250 A):15 seconds
The following diagram shows the welding current sequence and the gas flow when the TIG
Comfort Stop function is activated:
TIG Comfort Stop: Welding current and gas flow
$
PD[
$
$
PLQ
V
V
V
V
*DVSUHIORZ
*DVSRVWIORZ
