17
EN
The Setup menu
Setting options
Functional princi-
ple
The parameters can be set at 4 levels (TP 2500/3500) or 5 levels (TP 2500/3500 TIG). The
number of indicators lit corresponds to the level reached.
Setting parame-
ters
To alter a parameter setting, proceed as follows:
1.
Using the "Process" button, select the desired parameter and hold the Process button
down.
-
the set level is indicated for 1 second
-
while the Process button is held down, the set value is raised one level every sec-
ond
2.
Release the process button once the desired level is set.
3.
The setting is now saved
4.
The set process is displayed
Welding process Settable parameters
Factory setting
Arc-force dynamic
Level 2
Arc-force dynamic
Level 2
Cel characteristic and arc-force dynamic
Level 2
TIG Comfort Stop
Level 0
Pulse frequency (TP 2500/3500 TIG only)
Level 1
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
IMPORTANT!
The welding parameters are retained even if the mains plug is disconnect-
ed.
