Fronius Robacta TC 2000, Operating Instructions & Spare Parts

Page: 11 / 72

11
EN
EMC measures
Safety measures
at the installation
location and dur-
ing transport
Warning, electromagnetic field. Electromagnetic fields may pose as yet un-
known risks to health.
It is the operator's responsibility to ensure that no electromagnetic interference
occurs in electrical and electronic devices.
If electromagnetic interference is detected, the operator is obliged to take ac-
tion to rectify the situation.
Check for possible problems, and check and evaluate neighbouring devices'
resistance to interference according to national and international require-
ments:
-
Safety devices
- Power, signal and data transfer lines
- IT and telecommunications devices
- Measuring and calibrating devices
- Health of neighbouring persons
Supporting measures for avoidance of EMC problems:
1.
Mains supply
-
If electromagnetic interference arises despite the correct mains con-
nection, additional measures are necessary (e.g. use of a suitable
line filter)
2. Shielding, if necessary
-
Shield off other nearby devices
- Shield off entire welding installation
3. Do not have any magnetic or electronic data carriers about your person:
magnetic or electronic data carriers can be damaged by the magnetic
fields generated when the device is in use.
4. Do not have any watches or pieces of metal about your person. Watches
can be damaged when the device is in use.
A device toppling over could easily kill someone. Place the device on a solid,
level surface such that it remains stable
-
The maximum permissible tilt angle is 10°.
Special regulations apply in rooms at risk of fire or explosion
-
Observe relevant national and international regulations.