manualshive.com logo in svg

Fronius Robacta TC 2000, Operating Instructions & Spare Parts

Share
Download
Fronius Robacta TC 2000 Operating Instructions & Spare Parts Download Page 39

39

EN

Bolting the cleaning device to the underlying sur-

face (foundation)

Screwing the 
cleaning device 
and installation 
stand to the un-
derlying surface 
(foundation)

Place the optional installation stand on a level, firm and vibration-free surface (foun-
dation)

-

Position the installation stand in such a way that the distance the robot has to trav-
el to the cleaning device on the installation stand is as short as possible

Screw the installation stand to the underlying surface (foundation) using the appropri-
ate fixings

Position the cleaning device on the in-
stallation stand
Screw the cleaning device to the instal-
lation stand using the four screws sup-
plied with the cleaning device 

NOTE! 

The device should only ever be set up with the designated installation 

stand.

NOTE! 

Different fixings may be required to connect the installation stand to the 

underlying surface (foundation) depending on the nature of this surface. The fix-
ings required to connect the installation stand to the underlying surface (founda-
tion) are not included in the scope of supply of the installation stand. The screws 
included in the scope of supply of the installation stand are not suitable for fixing 
the installation stand to the underlying surface. The installer is responsible for se-
lecting the right type of fixing. 

1

2

3

4

Summary of Contents for Robacta TC 2000









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands