background image

23

EN

Before commissioning

Safety

WARNING!

Operating the equipment incorrectly can cause serious injury and damage.

Do not use the functions described here until you have thoroughly read and understood the 
following documents:
► these operating instructions
► all operating instructions of the vehicle, the refuelling system and other system compo-

nents, particularly the safety rules

Proper use/in-
tended purpose

Responsibility for operation of the device rests with the user. Overall vehicle safety (Hy-
LOG Fleet, vehicle and its operation in a working area) is the responsibility of the vehicle 
system supplier. The vehicle system supplier must ensure that all safety issues relating to 
the integration of the device into the vehicle have been clarified with the device manufac-
turer.

The device is intended exclusively for the generation of electrical energy from hydrogen 
with oxygen from the air and may only be used in a suitable transport vehicle for in-house 
logistics, and for production of the electrical energy for driving such vehicles.

In-house transport vehicles are deemed to be suitable if the following conditions are met:
-

Analysis of overall system safety and supply of general system user documentation 
(energy cell and vehicle) adapted for use of the vehicle with HyLOG Fleet.

-

Information provided to the driver and surrounding area concerning safety-relevant 
operating states of HyLOG Fleet (warning of hydrogen leak, etc.)

-

Weight compensation, if required due to the fact that HyLOG Fleet is lighter than a bat-
tery (driving stability, traction, etc.)

Any use above and beyond this purpose is deemed improper. The manufacturer shall not 
be held liable for any damage arising from such usage.

Proper use also includes:
-

ensuring that the device is undamaged and in perfect condition

-

verifiable training of users before using for the first time

-

carefully reading and obeying all the instructions in these Operating Instructions, es-
pecially the safety rules and all safety and danger notices

-

installing the device in accordance with the vehicle manufacturer's Operating Instruc-
tions

-

carrying out all the specified inspection and maintenance work

-

observing all instructions of the vehicle manufacturer and the refuelling system man-
ufacturer

-

obeying other relevant national safety rules

WARNING!

Improper operation, maintenance or transportation can result in serious injuries and 
damage.

There is a container of pressurised hydrogen in the device, and it must therefore be treated 
with care. The regulations on proper use must be observed.

Summary of Contents for HyLOG Fleet 24015F













































Reviews: