24
1.
Open the CHARGING CABLE menu
2.
If necessary, change measure (metric/imperial) by pressing the info button:
3.
Set the length of the charger cable. Setting range: 1 to 25 m (3 ft. 3 in. to 82 ft.)
- Press Start/Stop button
- Display flashes. Set the length of the charger cable
- Press Start/Stop button to confirm setting
CHARGING
CABLE menu
3.
Save the desired mode and exit the menu.
Important!
Regardless of the „preferred setting“ saved, another mode can be selected
at any time. After disconnecting the charging terminals or mains supply, the device
automatically reverts to the saved „preferred setting“.
Pre
ferred
Set
ting: modes
Save charge acceptance test, standard charging, user charging, „flash operati-
on“. After disconnecting the charging terminals or mains supply, the modes are
saved.
PRESET menu
(preferred set-
tings)
(continued)
Charge acceptance test
Standard charging
Flash operation
User charging
Summary of Contents for Acctiva Professional 30A UCN
Page 2: ......
Page 12: ...IV ud_fr_ls_sv_01086 042006...
Page 52: ...IV ud_fr_ls_sv_01087 032006...
