11
EN
1.
During charging, the number of bars indicates how charging is progressing.
Charging
2.
Ensure charging terminals are connected to correct poles
3.
Starting charging
1.
Once the charging terminals are connected, press start/stop button for approx. 5
secs
WARNING!
Risk of serious damage as a result of incorrectly connected char-
ging terminals. The reversal polarity protection facility is inoperative if charging
is started manually (battery voltage < 1.0 V). Connect charging terminals to
correct poles and ensure proper electrical connection to vehicle terminals.
Starting charging
manually (deep-
discharge battery)
-
Display shows 6 consecutive bars
-
Battery is now ready for use
2.
Final charging stage - once the battery is approx. 80 - 85 % charged
Important!
the charger automatically switches over to conservation charging after
approx. 3 - 7 hours, depending on the type of battery.
To charge the battery completely, the battery should remain connected to the charger for
this length of time.
NOTE!
Only in Refresh charging mode:
When refresh charging has finished, the machine switches off. Conservation
charging does not take place.
If there is no confirmation of correct pole connection within 2.5 secs, the device reverts
to menu mode.
Summary of Contents for Acctiva Professional 30A UCN
Page 2: ......
Page 12: ...IV ud_fr_ls_sv_01086 042006...
Page 52: ...IV ud_fr_ls_sv_01087 032006...