Fronius 8,045,368, Operating Instructions Manual

Page: 18 / 60

16
Welding position and seam tracking
Possible
welding
positions
The 4-wheel drive and built-in permanent magnet ensure that the driving vehicle adheres
optimally to the workpiece and guarantee the best possible traction. The following weld -
ing positions are possible.
IMPORTANT! In vertical operation, the driving vehicle must be secured by a load secur-
ing device with a locking function to prevent it from falling. The load securing device must
be designed for the total weight of the vehicle. The manufacturer accepts no liability for
any damage to persons or property resulting from vertical use of the driving vehicle with -
out a load securing device.
Sloping Horizontal
Outside of container with min. diameter of 3000 mm Vertical
NOTE! From an angle of 45° upwards, the driving vehicle must be secured by a
load securing device with a locking function to prevent it from falling.
NOTE! When used on the outside of a container, the container must be turned
in the opposite direction and at the same speed.