FS3.2780-Manual-34.111XXXXXXXXX.V01-EN03.doc
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden t
o duplicate this manual or parts thereof or any other form without the author’s authorisation © 2018
28
GENERAL INFORMATION
SETTING PARAMETERS FROM DIRECT KEY IN AUTOMATIC PROGRAMS
In an automatic program, when you enter the settings page of one of the following functions:
Pre-stretch;
Carriage speed;
Tensioning;
High/low rpm;
Turntable speed;
Top-sheet;
Cutting system;
Enter the values and press
to modify them and
or
to increase or decrease these values.
Press
or wait two seconds after entering the values to confirm the choices and exit the settings
page.
Similarly, press
to cancel the choices and exit the settings page without saving.