5
A383 microlock man
5
TECNICAL DATA
Description of the tool
The tool model A383 has been designed to strap packages with steel strapping. The steel strapping is fed
around the package manually or in combination with a strap feeder.
The strap is inserted in the tool, tensioned, sealed by punching and at the same time the strapping is cut from
the strap coil.
Dimensions without suspension bracket
Length:
420 mm / 16.5"
Width:
195 mm / 7.6"
Height:
350 mm / 13.7"
Weight:
23.1 kg / 50.82 lbs
Sound information
The A-weighted equivalent continuous sound level at the work place of the machine operator is
typical 78 dB (A).
This value was determined according to DIN 45 635 T3 (11.85).
Vibration information
The weighted effective value of the acceleration typically amounts to less than 2,5m/s
2
.
This value was determined according to DIN EN 28 662 T1 (01.93).
Steel strap
Width:
19 - 32 mm/ 3/4" - 1 1/4" (see chart of types).
Thickness:
0.63 mm - 1.3 mm / .025" - .050" (see chart of types).
Quality:
Fundamentaly the A383 allows the use of all current steel straps ranging from 700 to
1100 N/mm
2
(100 000 - 160 000 psi) in tensile (see chart of types).
Straps with a low breaking elongation are not suitable for the A383 tool.
Joint strength
Approx. 80% of the strap’s tensile strength.
6
INSTALLATION
Compressed air connection
The compressed air should be connected to the tool preferably by a quick disconnector.
It is very important to clean the compressed air with an air unit consisting of a separator for water and dirt, a
pressure regulator with a manometer and a lubricator (see sketch).
app
. 2%
fal
l
Shut off valve
Drain of main air line
Main air line min. 2
"
Air line min. 1/2
"
Pressure adjustment valve
with manometer
Filter with
Lubricator
(1 - 2 drops/min.)
water separator
with shut off valve
Air hose
max. length 5m (16ft.)
min. Ø-inside 9mm (3/8
"
)
Coupling min. G1/4
Air unit min. G3/8
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM
