13
A383 microlock man
12.2 Exchange of the feed wheel
• Remove the left strap stop
• Unscrew the three screws and remove the bearing cover.
• Remove the front distance ring, the O-ring and the feed wheel from the feed wheel shaft.
• Assembling in opposite order.
Important! Take notice of the assembling position of the feed wheel.
12.3 Exchange of the gripper
• Remove the left strap stop and the bearing cover.
• Remove the front distance ring, the O-ring and the feed wheel from the feed wheel shaft.
• Remove cross-recess screw and holder so that the gripper can be removed.
• Clean the groove and firmly retighten the holder after insertion of the new gripper.
• Assembling in opposite order.
Important! The screw N1.1807 has to be secured with Loctite 222.
Gripper
N1.1807
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM
