Safety
Page 18
B0600008_US
v
2
2.3
Design information
It is unlawful to carry out modifications to the boiler or to change or
deactivate safety equipment.
In addition to the operating instructions and the applicable national and
local codes and regulations for installation and operation of the boiler
system, all fire, police, and electrical regulations must be observed.
2.3.1
Approvals and reporting obligations
IMPORTANT: Install, modify and use only in accordance with manu-
facturer’s installation & operation manuals. Refer to authorities hav-
ing jurisdiction for proper installation. Contact local building and fire
officials about restrictions and installation inspection in your area. If
there are no applicable local codes, follow ANSI/NFPA 211 and
CAN/CSA B365. Special precautions are required for passing the
Chimney through a combustible wall or ceiling.
Inspect and clean exhaust system frequently in accordance with
Owner’s Manual.
2.3.2
Requirements for initial filling and re-filling of heating system
Water quality conditions for initial filling the heating system:
For first filling of heating system water must be clean, pure or purified,
odorless and without suspended matter.
For re-filling of small amounts water shall be clean at least.
For swimming pools or spas do not use heating water directly. Proper
sized heat exchangers are required! Boiler water is not potable!
Use of a suitable antifreeze mix is allowed, but will cause a loss in heat
transfer efficiency.
