Technical data
34
– EN
ACT VS 3000 - 6000
11.15.14
Displaying / changing process user parameters
1-
With the dryer stopped (STANDBY) or operating (ON mode), press the
button to access the dryer's menu of functions.
2-
Press the
button to display the list of process user parameters and
respective current settings.
3-
Scroll through the list of parameters using the
buttons.
4-
Touch the screen on the parameter to be changed to display the possible
settings (see user parameter table), then select one of the settings. If the
parameter to be changed requires a numerical value, set the new value using
the numerical keypad within the max and min limits shown.
5-
Confirm the setting or numerical value entered using the
button or
press the
button to return to the parameter list without making any
changes. Repeat operations
3- 4- 5-
for all parameters to be changed.
6-
Press the
button to return to the previous screen at any time.
7-
Press the SW tab to show the firmware version of DMC50 electronic
control unit. All other functions included in the SW tab screen are password
protected and they do not contain user functions
8-, 9-
Buttons
are reserved for technical/diagnostic password-
protected operations. They do not contain user functions.
1-
2-
3-
4-
5-
6-
7-
8-
9-
