Technical data
ACT VS 3000 - 6000
EN - 31
11.15.8 Downloading the process values stored following an alarm
NOTE! Only qualified skilled personnel should perform following
operations.
Process values for stored alarms can be downloaded in .txt format onto a
USB stick after resetting an alarm (see section
10.15.6,
step
7-
), or from the
screen for consulting the alarms log file (see section
10.15.7,
step
7-
).
Preliminary steps
- Switch OFF the dryer by means of the main switch
- Open the control panel door with the special key provided with the dryer.
- Insert a formatted USB stick in the relevant port on the back of the touch
screen module.
- Close the control panel door carefully.
- Switch ON the dryer.
1-
Press the
button to access the process value download function.
2-
Confirm that the process values are to be downloaded with OK, or exit the
operation with Cancel.
3-
Confirm the download operation was successful with OK.
4-
Press the
button to return to the previous screens
Final steps
- Switch OFF the dryer by means of the main switch
- Open the control panel door with the special key provided with the dryer.
- Remove the USB stick.
- Close the control panel door carefully.
- Switch ON the dryer.
11.15.9 Displaying instantaneous process values for the compressor variable speed drive
1-
With the dryer operating (ON mode), press the
button to access the
dryer's menu of functions.
2-
Press the
button to display the list of instantaneous process values
for the compressor variable speed drive.
3-
Scroll through the list of values using the
buttons.
4-
Press the
button to return to the previous screen at any time.
NOTE!
The dryer must be started and the compressor running to show the current
variable speed drive process values.
With dryer stoppe
d (STANDBY) all values shown are “0“
4-
1-
2-
3-
1-
2-
3-
4-
