Network Settings in the FRITZ!Box
FRITZ!Box 4020
79
Changing the IP Address Range of the DHCP Server
If the DHCP server does not have enough IP addresses, you
can expand the address range.
Disabling the DHCP Server
You can disable the DHCP server of the FRITZ!Box.
•
If you use a different DHCP server in your home network,
you must disable the DHCP server of the FRITZ!Box.
•
If you want to manage the IP address assignments of all
devices in the home network yourself, you can disable
the DHCP server of the FRITZ!Box.
Please note that the FRITZ!Box must be located in the same IP
network as all of the device connected with it. Integrate the
FRITZ!Box in your network by adjusting the IP address of the
FRITZ!Box to your home network.
IPv6 Settings in the FRITZ!Box
The following settings options for IPv6 are found in the ad-
vanced view in the “Home Network / Network” menu on the
“Network Settings” page.
Additional IPv6 Routers in the Home Network
•
IPv6 prefixes from other IPv6 routers
You can allow the network devices connected to the
FRITZ!Box to receive IPv6 prefixes announced by other
IPv6 routers in the local network.
•
Also announce DNSv6 server via router advertisement
With this setting you specify that the FRITZ!Box announc-
es the local DNSv6 server in the local network via router
advertisement. Alternatively, the network devices can
identify the local DNSv6 server via DHCPv6.
IPv6 Settings
Click the “IPv6 Addresses” button to configure settings for
the IPv6 addresses in the local network.
