Setting the grinding time
1.
Press the "MILLING" button.
ð
The "MILLING" button lights up
2.
Press the + or - buttons to set the running time in hours (0–99) and
minutes (0–59) or in minutes (0–59 and seconds (0–59).
Set the pause time
1.
Press the "PAUSE" button.
ð
The "PAUSE" button lights up.
2.
Press the + or - buttons to set the pause time in hours (0–99) and
minutes (0–59) or in minutes (0–59 and seconds (0–59).
If no pause time is required, set the pause time to 0.
– If the combination minutes/seconds is set in setup
mode instead of hours/minutes (see
6.8.2.1 ‘Setting time units’ on page 42), the num-
bers at h indicate the minutes and at min, the sec-
onds!
The factory setting of the time unit is minutes and
seconds. (Display: 1)
– The remaining running times and the pause times
are displayed during operation.
– Operation with an external time switch is not pos-
sible.
– For running times see
time (grinding duration)’ on page 33.
– Interrupt grinding by pressing the STOP button.
Continue grinding by pressing the START button.
This takes into account the previous grinding dura-
tion and the number of repetitions.
Using the device
- 41 -