6
Using the device
DANGER!
Before starting the machine, make sure that the
grinding bowl has been tensioned correctly and that
there are no loose parts inside the device. There is a
risk of loose grinding bowls or parts being projected.
Failure to observe this will render void the guarantee,
and releases us from liability for any resulting damage
to the device or personal injury.
NOTICE!
During grinding, high temperatures and high pressure
may appear in the grinding bowl.
In encased grinding bowls, the inserts are glued into
the casing with a two-component construction adhe-
sive.
The adhesive is resistant to temperatures up to approx.
140 °C. Above 140 °C, the adhesive will liquefy. That can
cause irreparable damage to the insert. The grinding
bowl will definitely be rendered unusable.
The device requires a start-up phase at the beginning in
order to reach maximum performance. A well‐filled and
heavy grinding set may initially operate at a lower
speed than after running for approximately 1 - 2 hours.
6.1 Choice of grinding bowls and grinding balls
CAUTION!
If the grinding elements used are not genuine accesso-
ries, we assume no guarantee and exclude all liability
for damage to the device or for personal injury.
Using the device
- 27 -