3.
Insert the camera with lens. To do this, hold the lens tilted back-
wards in the device housing, as shown in the picture, and hook the
flat rail runner onto the rail from behind. Then tilt the lens for-
wards and position it on the rail. The lens holder can be moved
back and forth on the rail.
NOTICE!
Only remove the front cap from the lens once it
is located on the rail!
4.
Remove the front cap and push the flat rail runner in the direction
of the falling chute as far as the end stop.
5.
When the flat rail runner is seated at the end stop, secure it with
the two knurled screws.
The lens is recognised automatically by the device and
shown in the software.
Installation
- 25 -
