n
Make sure that:
– all switches / control elements are easy to access;
– the connections (USB, network connections) are freely acces-
sible.
n
Please store the transport packaging so that it can be reused if you
need to return the product. Fritsch GmbH accepts no liability for
damage caused by improper packaging (non-original packaging).
4.4.1 Transport securing devices
Proceed as follows to remove the transport securing device:
1.
Loosen the two knurled screws on the funnel holder.
2.
Unscrew the funnel holder until it is over the transport securing
device.
3.
Loosen the two knurled screws on the vibration feeder holder and
pull out the transport securing device towards the front.
4.5 Ambient conditions
WARNING!
Mains voltage
– The device may only be operated indoors.
– The surrounding air must not contain any electri-
cally conductive particles.
– Maximum relative humidity 80% for temperatures
up to 31 °C, linearly decreasing down to 50% rela-
tive humidity at 40 °C.
n
The room temperature should be between 5 and 40 °C.
n
Storage and transport is possible between 1 and 40 °C.
n
If stored or transported below 10 °C, you must wait until the device
has warmed up to ambient temperature before switching on.
Installation
- 22 -
