Designation
Explanation
[Button]
Operating elements (e.g. push button, switch),
display elements (e.g. signal lamps)
‘Display’
Screen elements (e.g. buttons, function key
assignment)
2.5 Device safety information
n
The particle sizer has been designed from the viewpoint of safety to
users; nevertheless, residual hazards cannot be ruled out.
n
The device may only be used for the purpose described under
Chapter 2.2 ‘Scope of application’ on page 10.
n
Only use original accessories and original spare parts. Failure to
observe this instruction can compromise the safety of the machine.
n
Safe conduct must be strictly observed during all work with the
device.
n
All currently applicable national and international accident preven-
tion guidelines must be complied with.
n
Do not remove the information signs.
DANGER!
Explosion hazard!
– The device is not explosion-protected!
– The device must not be used in electrically conduc-
tive, dusty or damp environments.
DANGER!
Mains voltage
– Do not allow any liquids to run inside the device.
WARNING!
The maximum accepted concentration (MAC) levels of
the valid safety regulations must be observed. If neces-
sary, ventilation must be provided or the machine must
be operated under an extractor hood.
NOTICE!
Immediately replace damaged or illegible information
signs.
Safety information and use
- 14 -
