2
Safety information and use
2.1 Requirements for the user
This operating manual is intended for persons assigned with operating
and monitoring the Fritsch of the ANALYSETTE 28 ImageSizer. The oper-
ating manual and especially its safety instructions are to be observed by
all persons working on or with this device. In addition, the applicable
rules and regulations for accident prevention at the installation site are
to be observed. Always keep the operating manual at the installation site
of the of the ANALYSETTE 28 ImageSizer.
People with health problems or under the influence of medication,
drugs, alcohol or exhaustion must not operate this device.
The of the ANALYSETTE 28 ImageSizer may only be operated by author-
ised persons and serviced or repaired by trained specialists. All commis-
sioning, maintenance and repair work may only be carried out by techni-
cally qualified personnel. Qualified personnel are persons who, because
of their education, experience and training as well as their knowledge of
relevant standards, regulations, accident prevention guidelines and oper-
ating conditions, are authorised by those responsible for the safety of the
machine to carry out the required work and are able to recognize and
avoid possible hazards as defined for skilled workers in IEC 364.
In order to prevent hazards to users, follow the instructions in this
manual.
Malfunctions that impair the safety of persons, the of the ANALYSETTE
28 ImageSizer or other material property must be rectified immediately.
The following information serves both the personal safety of operating
personnel as well as the safety of the products described and any devices
connected to them: All maintenance and repair work may only be per-
formed by technically qualified personnel.
This operating manual is not a complete technical description. Only the
details required for operation and maintaining usability are described.
Fritsch has prepared and reviewed this operating manual with the
greatest care. However, no guarantee is made for its completeness or
accuracy.
Subject to technical modifications.
2.2 Scope of application
The ANALYSETTE 28 ImageSizer is used for the analysis of the particle
shape and size of powders and bulk solids. The particle sizer has an extra-
large measuring range of 20 µm to 20 mm! It is therefore an ideal device
for uncomplicated quality control in various areas of application.
The particle sizer described here is an operations resource for use in
industrial environments. This operations resource possesses hazardous
live components during operation.
Safety information and use
- 10 -
