4.10.1
Checking the communication between the camera and the PC
1.
Click on the icon "ISS.exe" to start the Image Sizing software.
2.
Click on ‘Configuration’ to go to the configuration settings.
3.
In the left part of the screen, the software opens a new window
with the various configuration options. Click on ‘Measurement
settings’ .
4.
Then click ‘Setup’ under "Device settings".
5.
When the camera has been recognized, you can test the image
transfer and the camera function by holding a brush or pencil in
the falling chute, whereby the object will be displayed in the
"Camera Set-up" window.
6.
If this is the case, then the communication between the camera
and the PC is functioning correctly.
Installation
- 32 -
