Frigomat Twin lcd 35, Manual For Use And Maintenance, Page: 33 / 97

ENGLISH - 28
5.4.4 SEMI – AUTOMATIC CYCLE WITH TIME CONTROL.
- With the machine in STOP mode, press
“ SEMIAUTOMATIC” to enter the batch
freezing mode selection screen.
- Press “ DOWN ( ▼ ) ” to select “ TIME ”. Press
“ OK ” to enter the batch freezing parameters
set-up menu.
- The first default item is the time SET
expressed in minutes and ranging between 0’
and 30’: press “
UP ( ▲ ) ” and “ DOWN ( ▼ ) ” to
increase or decrease the value. Higher batch
freezing times correspond to higher
consistency values and viceversa.
The batch freezing time usually ranger
between 7 and 10 minutes according to the
mixtures and the quantity introduced.
For low quantities of mixture introduced, do not
select time superior to 5 – 7 minutes.
- Then press “ OK ” to confirm the consistency
value and pass to the subsequent item.
- The second item to be programmed is the
“Turbo” function, that is to say the period of
time at the beginning of batch freezing during
which you want to batch freeze at high speed.
Press “
UP ( ▲ ) ” and “ DOWN ( ▼ ) ” to increase
or decrease the high speed agitation time from
a minimum of 0” to a maximum of 5 minutes at
steps of 15”.
A period of time ranging from 30” and 1’30” is
recommended for milk-based mixtures or with
such a content of facts to allow a good volume
increase at end product.
Normally water-based fruit mixtures do not
require high speed batch freezing.