Frigomat Twin lcd 35, Manual For Use And Maintenance, Page: 29 / 97

ENGLISH - 24
5.7.1 AUTOMATIC CYCLE
- The consistency value is visualized on the
display during the whole batch freezing cycle.
- fter a few minutes and after the best possible
compromise between the batch freezing time
and the consistency, in relation to the type and
quantity of mixture used has been reached, the
compressor stops, the display visualizes the
message “
Extract ” and an intermittent acoustic
signal (beep) warns the operator that it is
possible to draw the ice-cream out. If this is not
immediately possible, the agitator keeps on
rotating until the consistency level falls down
by a predetermined percentage value starting
the ice-cream PRESERVATION cycle, which
can be stopped with the delivery of the ice-
cream.
To obtain a thicker ice-cream, it is advisable to
let the compressor run twice or three times.
- To deliver the ice-cream, loosen the knob on
the door and push it upwards so as to open the
delivery opening completely; then press
EXTRACTION to bring the machine from low
to high speed and to guarantee a fast ice-
cream delivery from the freezing cylinder.
- After the ice-cream delivery has been
completed, press STOP, close the door again
and the machine is ready for another batch
freezing.
It is advisable to use the AUTOMATIC batch
freezing cycle for:
- Water-based fruit mixtures
- Mixtures with low content of sugars
- Small
quantities