OPERATION UNDER TIMER MODE
“PROGRAM” Mode (Programmed start and stop)
Monosplit ON/OFF models:
HKEJ 261 G, 351 G
MODE
AIR REFRESH ON/OFF
TEMPERATURE
FAN SPEED
AUH
FAN SWEEP
TIME
TIMER
HOUR
MINUTE
RESET
SET TEMP
PROGRAM
1
2
1.
2.
Perform the current time
setting proceeding as
previously explained.
Please refer to the
setting to adjust the time
for programmed start.
Please refer to the
setting to adjust the time
for programmed stop.
ON
OFF
Press the "TIMER" button
repeatedly until the symbol
shown below is displayed
on the LCD screen of the
remote controller:
PROGRAM
ON
PROGRAM
OFF
PROGRAM
According to the programmed time
settings, the air conditioner will start
operating and then stop or vice versa.
For your reference, the symbols
displayed on the LCD screen of the
remote controller are the following:
If it is not disabled, each program set
for start and stop will be repeated
everyday.
If the air conditioner is switched OFF
manually before the programmed time
for stop is reached, the setting for
programmed start will remain valid all
the same.
If the air conditioner is switched ON
manually before the programmed time
for start is reached, the setting for
programmed stop will remain valid all
the same.
NOTES: