TUBE STRAPPING
• Strap with PVC Protective tapes the tubes, discharge pipes, connecting wires.
• Strapping should start from the lower part of the outdoor unit to the tube bundle
wall inlet.
• Fix the PVC protection tapes with plastic adhesive tapes to prevent loosing.
• Fix the tube bundle with tube clamps on the wall.
• Seal the external wall holes with sealing gum or putty.
• Do not strap too tightly, otherwise it will affect the insulation effects.
• For appropriate dripping location, strapping should be such that there is a
sufficient length of exposed discharge hose. Do not insert the drain hose into the
ditch.
• When indoor unit is lower than outdoor unit, please bent the pipe to prevent
water from dropping.
Wall
Clamp
PVC protective tape
Drainage outlet
Fig. 14
