OPERATING THE AIR CONDITIONER
Adjusting the airflow direction
At startup, the front panel opens
automatically as shown in the figure
on the left. Under all operating
modes, the indoor fan rotation is
allowed only if the front panel has
opened previously.
Monosplit ON/OFF models:
HKEJ 261 G, 351 G
Monosplit ON/OFF models:
HKEJ 261 G, 351 G
• Horizontal adjusting
To adjust the horizontal direction of the airflow blown by the air conditioner, you can manually set the
louvers to the left or right, according to the actual comfort needs. For safety reasons, the air conditioner
must be switched off before, to avoid touching the indoor fan while it is rotating at high speed.
• Vertical adjusting
Louvers (left/right adjusting)
1
2
3
6
4
5
Press repeatedly the "FAN SWEEP" button on the remote
controller, to adjust the vertical direction of the airflow blown
by the air conditioner.
It is possible to select one among 6 available stop angles
for the motorized flap (see picture on the right), or also to
activate the automatic swinging for the flap ("AUTO
SWING" option): up/down and vice versa. The swinging
angles depend on the current operating mode:
- In COOL and DRY mode, swinging is between 2 and 5 .
- In HEAT mode, swinging is between 1 and 4 .
- In SWEEP mode, swinging is between 1 and 5 .
Automatic opening of the front panel
