minutes, and then return to display the index of air refresh. LCD will not display the index if air refresh
function is stopped running. Only run indicator lights If SLEEP function is set for 30 seconds later; and it will
display all setting if remote control signal is received.
3.5.5 Air refresh function
Press air refresh button when the unit doesn’t run, air refresh and run indicators will light (display the
index of air refresh), air conditioner will be turned on and runs at the set fan speed; in ion mode, anion are
working according to 10 minutes working alternating with 5 minutes stopping. When air refresh function is
turned off, the unit will turn back to the original mode. Press air refresh button if Air conditioner is running,
air refresh will be functioned and the indicator will light too.
3.5.6 Quiet Operation
Press quiet button when air conditioner is in SWEEP mode, the indoor fan will run at breeze;
Press air refresh button if air conditioner doesn’t run, the indoor fan will run at breeze if the setting fan
speed is breeze.
Quiet function is not effective for other status.
3.6 Parameter table
Temperature table of protecting point
The type of remote controller for heat-pump air conditioner is KK10A.
The type of remote controller for cooling-only air conditioner is KK9B.
Fan motor rotation
Voltage
High fan speed
Medium fan speed
Low fan speed
Breeze
0.5 1080 980 880 760
1.0 1110 1010 910 770
1.5 1140 1040 940 780
2.0 1170 1070 970 790
2.5 1200 1100 1000 800
3.0 1230 1130 1030 810
3.5 1260 1160 1060 820
4.0 1290 1190 1090 830
4.5 1320 1220 1120 840
5.0 1350 1250 1150 850
Model
A
B
C
D
E
F
G
H
HKEJ 261 G
49
52
65
44
42
32
39
22
HKEJ 351 G
54
57
70
48
46
34
43
26
