Frigidaire GRFC2353AD Page 44 Use & Care Manual Download

Page: 44 / 52

CARE & CLEANING

Vacation and moving tips

Occasion Tips

Short

Vacations

• Leave refrigerator operating during vacations of three weeks or less.

• Use all perishable items from refrigerator compartment.

• Turn automatic ice maker off and empty ice bucket, even if you will

only be gone a few days.

Long

Vacations

• Remove all food and ice if you will be gone one month or more.

• Turn the cooling system off (see “Controls” section for location of On/

Off button) and disconnect power cord.

• Turn water supply valve to closed position.

• Clean interior thoroughly.

• Leave both doors open to prevent odors and mold build-up. Block

doors open if necessary.

Moving

• Unplug unit

• Remove all food and ice.

• Recommend use of a handcart, load from the side.

• Adjust rollers all the way up to protect them during sliding or moving.

• Pad cabinet to avoid scratching surface.

Care & Cleaning Tips

Part

What To Use

Tips and Precautions

Interior & Door

Liners

• Soap and water
• Baking soda and

water

Use two tablespoons of baking soda in one

quart of warm water.

Be sure to wring excess

water out of sponge or cloth before cleaning

around controls, light bulb or any electrical

part.

Door Gaskets

• Soap and water

Wipe gaskets with a clean soft cloth.

Drawers & Bins

• Soap and water

Use a soft cloth to clean drawer runners and

tracks.

Glass Shelves

•  Soap and water
•  Glass cleaner
•  Mild liquid sprays

Allow glass to warm to room temperature

before immersing in warm water.

Exterior &

Handles

• Soap and water
• Non Abrasive

Glass Cleaner

Do not use commercial household cleaners

containing ammonia, bleach or alcohol to

clean handles. Use a soft cloth to clean

smooth handles.

DO NOT use a dry cloth to

clean smooth doors.

Exterior &

Handles
(Stainless Steel

Models Only)

• Soap and water
• Stainless Steel

Cleaners

Never use CHLORIDE or cleaners with

bleach to clean stainless steel.

Clean stainless steel front and handles with

non-abrasive soapy water and a dishcloth.

Rinse with clean water and a soft cloth. Use

a non-abrasive stainless steel cleaner. These

cleaners can be purchased at most home

improvement or major department stores.

Always follow manufacturer’s instructions.

Do not use household cleaners containing

ammonia or bleach.

NOTE: Always clean, wipe and dry with the

grain to prevent scratching.

Wash the rest of

the cabinet with warm water and mild liquid

detergent. Rinse well, and wipe dry with a

clean soft cloth.

Summary of Contents for GRFC2353AD





















































Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands

Frigidaire GRFC2353AD, Use & Care Manual

Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands