Frigidaire GRFC2353AD Page 10 Use & Care Manual Download

Page: 10 / 52

INSTALLATION

Adjusting Flipper Mullion Screw

2. Adjust flipper mullion height. For

proper connection with the flipper

mullion guide, there should be a

separation about the thickness of

a coin (0.060 inches, or 1.5 mm)

between the guide and flipper

mullion.

3. Re-tighten screws.

To adjust the flipper mullion:

1. Loosen the two screws located on

the flipper mullion hinge.

Adjusting Flipper Mullion Height

Flipper

Mullion

Screws

Flipper Mullion

Adjust Flipper Mullion for proper

connection with the mullion guide by

ensuring the flipper mullion is folded and

perpendicular to the fresh food door. If

the mullion guide is not in the correct

position, it could prevent the door from

closing completely.

WRONG

Flipper

Mullion

Guide

Thickness

of a Coin

Summary of Contents for GRFC2353AD





















































Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands

Frigidaire GRFC2353AD, Use & Care Manual

Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands