Frigidaire GRFC2353AD Page 23 Use & Care Manual Download

Page: 23 / 52

WARNING

When using the cold drink timer, make

sure to remove drinks from freezer

compartment when alarm sounds.

Carbonated drinks may explode if left

in freezer for too long.

Freeze Boost (on/off)

Prior to grocery shopping, we

recommend you activate

Freeze

Boost

to lower the temperature and

freeze food faster.

Freeze Boost

will remain active for up to 24 hours

before automatically deactivating or

manually exiting by pressing

Freeze

Boost

to turn the function off. This

will reset the freezer to the previous

temperature setting.

Cold Drink Timer

Quickly chills a drink inside the

freezer compartment. To enable,

touch the Cold Drink Timer key. A

time value will appear on the freezer

temp display (in minutes) and can

be changed using the +/- buttons.

A tone will sound when the time has

been input. Range is from 20-45

minutes in 5 minute intervals. Drinks

will freeze if temperature setting is

too low or timer setting is too long.

Ice Maker

Press and hold for 3 seconds to turn

ice maker on/off. When indicator is

lit, ice maker is on. When indicator

is not lit, ice maker is in the OFF

state and will stop making ice. While

off, ice dispensing can continue as

long as there is ice in the bucket.

When ice maker is off and ice is

dispensing, indicator will blink.

Lock Controls

The lock button can be used to lock

the display preventing it from being

used in certain situations. Press

and hold for 3 seconds to enable/

disable. While in the locked state,

no changes can be made to settings

on the display. Dispensing ice and

water will be disabled. The indicator

will flash and an audible warning

tone is played.

Power Outage

In the event of a power outage,

the power outage alert will be

illuminated once power has been

restored and a tone will sound.

Press any button to silence the tone.

External Water Dispenser Control Display

CONTROLS AND SETTINGS

Summary of Contents for GRFC2353AD





















































Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands

Frigidaire GRFC2353AD, Use & Care Manual

Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands