19
OPERATING INSTRUCTIONS
cooling only models), or fan only operation
depending on what temperature you have
selected and the room temperature. The air
conditioner will control room temperature
automatically round the temperature point
set by you.
Note: In this mode, fan speed cannot be
selected.
When the unit is in Cool, Heat or Auto mode,
you can press the “sleep” button to make
the unit run in Sleep mode. In this mode, the
fan speed will be set as “Auto”
automatically, which cannot be changed.
In Cool/Heat mode the selected
temperature will increase/decrease by 2 °F
30 minutes after the mode is selected. The
temperature will then increase/decrease by
another 2 °F after an additional 30 minutes.
This new temperature will be maintained for
7 hours before it returns to the originally
selected temperature. This ends the "Sleep"
mode and the unit will continue to operate
as originally programmed.
The "Sleep" mode program can be cancelled
at any time during operation by pressing the
"Sleep", “mode”, “fan speed” or “on·off”
button.
Note: In Fan or Dry mode, Sleep mode
cannot be set.
Sleep mode
Press the “swing” button to enable louver
swing function, and the upper side of screen
will display “ ”. The louver on the top
panel will swing up and down. Press this
button again to disable the louver swing
function.
Louver Swing Function
Press the “ ” and “ ” button at the same
time for more than 3 seconds to switch
between degrees Fahrenheit and degrees
Celsius.
Note: In Dry/Fan mode, you cannot select
°F/°C.
°F/°C function
Summary of Contents for FHPC102AC1
Page 27: ......
