Never change or remove safety devices. Do not switch off safety devices by making changes to the pastacooker. Never
remove warning symbols which may have been fitted to the pastacooker (depending upon country). Immediately replace
missing or defective warning symbols.
Never operate the pastacooker in a damaged condition. Report immediately any irregularities, especially those which
affect safety, to your managers.
When exchanging electrical or mechanical components ensure that the pastacooker is disconnected from the mains
power supply. Always check all safety functions after completing servicing work.
3.3
Availability of operating manual
A copy of this operating manual must be available at all times to the personnel at the installation location of the
pastacooker.
4
INSTALLATION AND STARTING UP
4.1
Installation of the floor standing appliance
When installing the machine, please take into consideration the following points:
a)
The pastacooker has to stand level and its height can be changed by using the adjustable legs (Between 850mm min.
and 900mm)
b)
Minimum distance between the back of the pastacooker and a wall or another device is 30 mm.
c)
The pastacooker should not stand on an inflammable surface. Please comply with local safety and construction
regulations.
d)
The unit is fitted with an outlet for a floor level drain.
e)
Remove all packaging. Clean the pastacooker and the accessories with a non caustic cleaning agent, which is
approved for the food area use.
f) Close the drain valve.
4.2 Installation of built-in unit.
4.21 Installation of the tank.
The stainless steel hobtop requires a cutout to the sizes below
